OBD-II DTC Physics

High Positive LTFT (+10% to +25%): Vacuum Leak vs. Dirty MAF vs. Weak Fuel Pump in 60s

First-Principles Mechanism ("The Hips"):
A cracked PCV hose leaks a nearly constant mass of air (~1.5 g/s). At idle (~5 g/s engine airflow), that leak is 30% of cylinder charge (+20% LTFT). At 2,500 RPM (~25 g/s airflow), that same leak becomes negligible and trims drop near 0%.
🎮 Run Sample Vacuum-Leak Log Free in Phoenix →
Telemetry ChannelHealthy TargetCaution ZoneCritical / Fault
Idle +18% -> 2,500 RPM +2%Downstream Vacuum LeakSmoke-test PCV hoses, intake seals, purge valve, brake boosterDIY / Any Shop
Idle +8% -> 2,500 RPM +16%Proportional MAF / Fuel ErrorClean/verify MAF g/s per liter & check fuel rail pressure under loadDIY / Diagnostic Tech

Step 1: Warm Closed-Loop Idle Capture (700 RPM)

Ensure coolant exceeds 180°F in closed loop with A/C off. Record Bank 1 and Bank 2 STFT + LTFT sum.

Step 2: 2,500 RPM Steady Neutral/Cruise Hold (30 Seconds)

Hold 2,500 RPM steady. If combined fuel trim drops by more than half toward zero, put away the MAF sensor and fuel pump—you are hunting unmetered air entering after the MAF.

Frequently Asked Questions

Q: What causes high positive LTFT at idle that disappears at 2,500 RPM?
An unmetered downstream vacuum leak (PCV breather hose, intake manifold gasket, EVAP purge solenoid, or brake booster hose) after the MAF sensor.

🎮 Run Sample Vacuum-Leak Log Free in Phoenix →

Related First-Principles Data-Log Guides