ECU Tune Safety

Power Enrichment (PE) Delay: Why Waiting at 1.00 Lambda Under Load Hurts Engines

First-Principles Mechanism ("The Hips"):
When you mat the accelerator at 2,800 RPM, cylinder airmass jumps within 150 milliseconds. If Power Enrichment waits 1–3 seconds to command 0.84 λ, peak torque hits at 1.00 λ stoichiometric flame temperatures—triggering knock retard followed by emergency Catalyst Over-Temp fuel dumping (0.74 λ).
🎮 Spot a 0.8s PE Delay in the Free Tune Playground →
Telemetry ChannelHealthy TargetCaution ZoneCritical / Fault
PE Entry Delay After >80% Load0.0 – 0.15 sec0.3 – 0.5 sec> 0.6 sec (Lean Tip-In)
Post-Shift Lambda RecoveryImmediate (<0.1s)0.3s lean dip> 0.5s at 1.00 λ

How to Measure PE Delay in Your CSV Log

Find the exact timestamp where Accelerator Pedal / Throttle crosses 80% and manifold pressure exceeds 95–110 kPa, then subtract the timestamp where Commanded Equivalence Ratio drops from 1.00 λ to ~0.85 λ.

Frequently Asked Questions

Q: Why does my wideband stay at 14.7 AFR (1.00 Lambda) for a full second when I floor it?
Power Enrichment enable thresholds (delay timer, minimum RPM, or torque request threshold) are holding the ECU in closed-loop stoichiometry during load onset.

🎮 Spot a 0.8s PE Delay in the Free Tune Playground →

Related First-Principles Data-Log Guides